High-Speed Taylorsville, Utah Internet Access

Accessing High Speed Internet in Taylorsville: Gigabit Internet, Organization Broadband and Metro Ethernet Access

Today’s environment demands that companies in Taylorsville have reliable Internet service in order to run their company. Fortune 500 companies to small companies and everything in between, depend on reliable and fast Internet access.

We’ll, in the months and years ahead, become more and more dependent on our access to The net.

The use of the internet is pervasive. We use it for email and data sharing, video conferencing and VOIP, archiving and commerce. What solution bet fits your needs? Maybe a cable modem is a sufficient solution. Is Metro Ethernet necessary? Gigabit Internet? What does your Taylorsville company need? Does it require 10 Meg Internet access, a 100 Meg Internet access point, a 50 Meg circuit or a 5 Meg circuit?

Internet Access: Defining the Organization Need

Before choosing an adequate or appropriate service, you must decide what your organization really needs. Is the internet only used for web surfing and email? Is connecting with cloud servers and sharing real time data the main use of the net? Perhaps you, in Taylorsville, Utah, are hosting the data and remote sites depend upon this.

Have you thought about what will happen to your business if your high-speed Internet is interrupted by an outage? What about the downtime that results? Can your organization afford that? Is uptime essential to the success of your organization? You must answer these questions before you buy.

High-Speed Internet Solutions in Taylorsville: Evaluating Differences

In all-encompassing terms, businesses need high-speed access to The web. Choosing the correct broadband internet for your organization requires a cost benefit analysis. While many providers like to spout technical terminologies such as:

• Fastest Internet access
• Business Internet service provider
• Broadband cable modem services
• Metro Ethernet
• Gigabit Ethernet services or Gigabit Internet
• MPLS network
• Services related to point-to-point circuits
• Five megabyte Internet access circuit
• 10 megabyte Internet access
• We have fifty-megabyte Internet access circuits
• One hundred megabytes- fast Internet access circuits
• Session Initiation Protocol/ Sip trunk
• Direct or dedicated Internet access
• … and then some

… you must not lose sight of the real issue, which is understanding what technical solutions best meet your needs.

Business Internet access for Website Surfing

At most businesses including those in Taylorsville, some or all employees need access to The net. Whether it is for company research, to order supplies or to use third-party applications, the net is required.

The number of employees you have may determine your best solution. A smaller Internet circuit may be enough if you only have a handful of workers. Perhaps a 5 or 10 megabyte is all you need. If you have many employees who need to use the web at the same time, you may do better with more.

Your workforce may simply use an intranet system with limited video and graphics. If this is true, your need for high speed Internet be less than you thought. However, employees who must often download documents, images and videos, need that speed.

Do you perform backups at your company? If, as recommended, you conduct remote backups from every single desk, you will need to support simultaneous connections out to the web. This will allow you to sync your backup data.

Do you use a file-sharing service? Perhaps you use Google drive, DropBox or a different service? As people save files, those files are pushed to the cloud and then synchronized back to other people’s computers. You need to have sufficient bandwidth to support this function while also supporting every other service.

High-speed company access to The net like Metro Ethernet and gigabit Internet may be viable options for you depending on your location. “Lit buildings” that have already been wired by a carrier, are commonly the site for these. Choosing to add high-speed Internet to your office is a tough decision but it can be less expensive and easier than you think.

Unless you are bringing Metro Ethernet into a new building, it does not have to be an expensive proposition to connect it to a suite within a building. Metro Ethernet or gigabit Internet may provide you with high-speed access to The web in thirty days or less, depending on availability.

Maximize Internet-based Applications With High-Speed Internet Access

Does your organization host its own servers to run information feeds, websites or application program interfaces (APIs) with companies or offices located outside of your four walls? Maybe your organization requires that dozens of satellite offices have access to a hosted application at your company main headquarters. Are you a retail company hosting the POS system for thousands of chain stores? Are you a legal practice hosting the data for three sites?

Access to data and programs by people outside of your main location becomes necessary when you host information centrally. For those people, no Internet connection means no work gets done. Can your intranet solution support your needs? Can it support multiple simultaneous connections? Is it stable enough to handle this when they are from various locations?

If you have one office using the web, you may get by with a cable modem or a low- cost 10-megabyte circuit. Company headquarters should have high-speed Internet access such as gigabit Ethernet, Metro Ethernet or some other high-speed dedicated circuit. High speed is important but they also must be able to support multiple distinct connections. This could probably not be accomplished with a cable modem.

Dedicated Bandwidth Versus Taylorsville Shared Cable Circuits

In many cases, installing an inexpensive cable modem comes at a price. You may save money on your monthly bill but the bandwidth you get must be shared among many people. It is possible that you have a cable modem with a 30 Meg connection but cannot reach proper speeds during peak hours. Cable operators are only permitted to establish a certain amount of bandwidth within communities. The bandwidth branches off to the multiple buildings, offices and tenants within them. While you may be capped at thirty-megabyte speed, will you ever reach that speed during organization hours? What will the consequences be if you expect 30 but only get half that? What if you get even less?

Some providers offer customers dedicated and guaranteed bandwidth. With these options, bandwidth is yours. It is not shared with anyone outside of your company. You should receive full capacity of your circuits during all hours. This is true even though you may have many buildings, businesses and tenants nearby.

For example, Metro Ethernet guarantees bandwidth in 5 met circuits, 10 Meg circuits, 50 and 100 Meg circuits. In your office out to the internet you can reach gigabit speeds with gigabit providers

In these scenarios, carriers deliver a large quantity of high-speed to a building. The quantity must be enough so that it can split the circuit and deliver to every tenant. Whatever amount has been guaranteed in each tenant’s contract is the amount they receive.

Backup With Taylorsville High Speed Company Internet Circuits

You can’t control everything. Even with the superior Internet bandwidth products that some carriers offer in Taylorsville, problems arise and circuits can fail. You must ask yourself: “how do I lessen the chance of an outage? ”

You may be a candidate for redundant circuits.

There are, in reality, two kinds of redundancy.

With the first kind, you receive several circuits but they all come from the same carrier. Redundant circuits can help protect against certain problems. They can mitigate the inconveniences when there is a failure of a physical line or a problem with the port into your router. However, if that carrier has a greater outage to your entire region or there is a line damaged outside of your office building, you may have both or all circuits go down. While offering some protection, it is not without risk.

The second way to set up circuit redundancy is by using two different providers to bring in your circuits. For users and the public, you can make it look like you have one cohesive circuit. You can also make the connections act as a single circuit. You can do this with various advanced routers and IP address allocations. In reality, they are completely separate and redundant to each other. Diversity redundancy provides greater assurance, comfort and protection. In the event a carrier goes down, you will not have to worry. You will have a perfectly live carrier there to keep things moving.

You want maximum redundancy. In order to achieve this, look for redundant circuits from different providers with different physical geographic pathways in Taylorsville. Essentially, this just means that you do not want both of your circuits to enter the building on the same side. They should come in on different sides. The circuits would be attached to telephone poles (or underground conduits) in different directions leading to different data centers or central offices. In this way you have redundancy in different physical directions. If there is an event that causes a regional circuit problem, you have an alternative that is unaffected.

What Are the Costs Associated With Not Adequately Protecting Your Organization High-Speed access to The Internet?

While access to The web is not free, it pales in comparison with the cost of not having reliable access to The Internet. Please consider these situations:

Does your organization rely on Voice-over Internet Protocol for telephone service?

Your organization is on a cable modem and your carrier provides circuits to 20 other offices in your building. Between 9 and 5, any of those other offices could be downloading huge files, streaming video or taking large volume of phone calls and more. As they use more bandwidth, there is less for available to meet your requirements. What happens to your phone calls? How will the quality of that phone call be affected? Are the calls going to be dropped? Will they be full of static?

Your office is the main data point for various other offices

You may be an accounting firm that shares databases, a retail chain company utilizing a point of sale system or a law practice sharing files. Regardless of the specifics, your office is the hub for your enterprise. All of your locations, whether 2 or 2000, depend on your primary Internet connection to access and retrieve data. What will happen if your circuit crashes? Is it just irritating? Is it going to cause tremendous problems? Are remote offices able to work at all? Can they take or process any orders at all? Dispense and receive data? Choosing the right solution depends largely on assessing and understanding the specific needs of your business. Perhaps you have hundreds of clients or customers that use a hosted solution that your software organization is running. Maybe you operate a service that allows other systems to speak with yours via API. This may be to collect miscellaneous data, calculate prices or shipping rates or other information. What if other systems can’t connect to your office servers? Multiple outages may annoy your customers.

The phones in your office, which functions as a call center, relies entirely on voice-over Internet protocol (VoIP)

Your organization is 100% reliant on the net to properly function. Should your circuits go down, your representatives cannot make outbound calls. In addition, they will be unable to answer incoming calls. Basically, you are out of business. Is redundancy enough? Many of the finest call centers with the best reputations already understand and use redundancy. They should consider if they have sufficient protection. Make sure your carriers are as reliable as possible. Do you consistently get quality service that provides clear and reliable calls?

Picking the Right High-Speed Organization Access Circuits for Your Company in Taylorsville

You have several different options to pick from. Your business budget and needs will play a large part in your decision-making. As a high-level summary:

Internet Access for the Small Business Owner

If you have one location or office and do not feel the need to consider redundancy for your system, a smaller Internet access circuit may be all you need. A single fifty, ten or five megabyte circuit might be enough. For an office in a lit building, you may find that gigabit service or Metro Ethernet are affordable options for you. The availability of circuits and your location determine prices; speak with one of our engineers to learn what your best options are.

Your Single Location Mid Sized Company Needs Internet Access

Mid sized companies with a single office in Taylorsville, need higher speed Internet access. Gigabit Internet, Metro Ethernet and other higher speed Internet circuits are options to consider. Ideally, multiple circuits from multiple providers will provide you with the greatest redundancy. Achieving this may not be as costly as you first thought. For example, you may use 2 fifty meg circuits instead of 1 one hundred meg circuit. Remember, costs vary. So does availability. You should speak with our experts to learn the options for your particular location.

Access to the internet for the Mid-Sized Organization with Several Offices

Companies with different locations, whether 5 or 50, are at the highest risk. Redundant circuits are essential. It is helpful if they use multiple providers. Redundant routers, switches and other equipment can also be helpful to lessen downtime during a problem. Look at all of your options: Ethernet access services, gigabit Internet providers, Metro Ethernet providers and other high-speed circuit providers. The correct combination of providers and services can keep your company running smoothly and efficiently.

Bigger corporations, enterprise companies and providers of services that are delivered using Internet

For businesses that fit this description, it is essential to have gigabit Internet circuits, point-to-point high-speed Internet circuits and Metro Ethernet Internet circuits. You absolutely need redundant circuits from different providers as well as redundant hardware. This is crucial to ensuring uptime. The last thing you want is interruptions or slowdowns affecting your company. You must provide enough bandwidth to avoid these pitfalls that sometimes occur during sudden usage spikes. Both your hardware and circuits must be capable of supporting a vast number of simultaneous and fast connections.

Free Analysis: Internet Need and Demand

The danger and risk of failing circuits is tremendous. So is the risk of having less bandwidth than you need. Your demand and budget constraints should both be considered when you decide what circuit or combination of circuits you must have. The pressure involved in selecting the proper mix of hardware and circuits can be overwhelming.

Our engineers can help. We are going to analyze your requirements and needs and create a free action plan for you. After reviewing your current usage and demand levels, we will generate a cost effective plan that provides your company with the resources it needs.

If you would like to arrange for an assessment, please click here to complete the contact information form to the right. You can call our office as well. We can often provide assessments within 48 hours.